Front Brake (Disc) Removal/Installation: Notes
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
- After installation, add brake fluid, bleed the air, and inspect for fluid leakage. (See BRAKE FLUID AIR BLEEDING .)
- Depress the brake pedal a few times, rotate the wheel by hand, and verify that the brake does not drag.
COMPONENT DESCRIPTION
| 1 | Bolt |
| 2 | Brake hose |
| 3 | Bolt |
| 4 | Caliper (See Disc Pad Installation Note .) |
| 5 | Disc pad (See Disc Pad Installation Note .) |
| 6 | Shim |
| 7 | Guide plate (See Guide Plate Installation Note .) |
| 8 | Bolt |
| 9 | Mounting support |
| 10 | Slide pin |
| 11 | Bushing |
| 12 | Dust boot |
| 13 | Disc plate |