Drive Plate Removal/Installation: Notes

Special Service Tool (SST) 

49 E011 1A0 Ring gear brake set

Courtesy of MAZDA MOTORS CORP.

-

-

Replacement Part 

Bolt

Quantity: 6

Location of use: Drive plate

1. Remove the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [FW6A-EL] .) (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [FW6AX-EL] .)
2. Remove in the order indicated in the table.
   Fig 1: Removing Drive Plate

   Courtesy of MAZDA MOTORS CORP.
   COMPONENT DESCRIPTION
   
   

   1	Drive plate installation bolts (See Drive Plate Installation Bolts Removal Note .) (See Drive Plate Installation Bolts Installation Note .)
   2	Backing plate
   3	Drive plate

3. Install in the reverse order of removal.