Auto Closure Does Not Operate [Power Liftgate (PLG) System]: Notes
AUTO CLOSURE DOES NOT OPERATE (POWER LIFTGATE SYSTEM) DESCRIPTION AND POSSIBLE CAUSES
| Description |
- The auto closure does not operate with the ignition switched ON (engine off or on).
|
| Possible Causes |
- Dirt or foreign matter on power liftgate (PLG) touch sensor
- Liftgate latch and lock actuator malfunction
- Power liftgate (PLG) control module malfunction
- Open circuit in wiring harness between the following terminals:
- Power liftgate (PLG) control module terminal 2J and liftgate latch and lock actuator terminal A
- Power liftgate (PLG) control module terminal 2G and liftgate latch and lock actuator terminal B
- Short to ground in wiring harness between the following terminals:
- Power liftgate (PLG) control module terminal 2J and liftgate latch and lock actuator terminal A
- Power liftgate (PLG) control module terminal 2G and liftgate latch and lock actuator terminal B
|