With auto-open/close function for driver-side window
BASIC POWER WINDOW SYSTEM INSPECTION (POWER WINDOW SYSTEM) DIAGNOSTIC PROCEDURE - WITH AUTO-OPEN/CLOSE FUNCTION FOR DRIVER-SIDE WINDOW
| STEP |
INSPECTION |
ACTION |
| 1 |
- Switch the ignition ON (engine off or on).
- Operate the power window using the manual open/close function on the power window main switch.
- Does each door glass open/close simultaneously with the switch operation?
|
Yes |
Go to the next step. |
| No |
- Inspect the power window main switch and the wiring harness.
- Repair or replace malfunctioning parts.
|
| 2 |
- Set the power cut switch to the UNLOCK (contact point: Close) position.
- Operate the power window using the power window subswitch.
- Does the door glass open/close simultaneously with the switch operation?
|
Yes |
Go to the next step. |
| No |
- Inspect the power window subswitch and the wiring harness.
- Repair or replace malfunctioning parts.
|
| 3 |
- Set the power cut switch to the LOCK (contact point: Open) position.
- Operate all power windows other than the driver-side.
- Does the door glass open/close?
|
Yes |
- Inspect the power cut switch and the wiring harness.
- Replace the power window main switch.
|
| No |
- Manual open/close function is normal.
- Perform the auto open/close function inspection.
|