Using M-MDS
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the SSU.
- Select an item name, and then select option.
| M-MDS display | Function | Initial setting | Setting contents | Control unit |
|---|---|---|---|---|
| Unlock Mode (Without Touch Sensor) | 2-step unlocking system can be set. | Once: Driver's, Twice: All Doors. | Touch Once: All Doors./Once: Driver's, Twice: All Doors. | Start stop unit |
- For the auto door lock function, refer to the personalization features for the RBCM. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE .)