Advanced Keyless Entry System
Using M-MDS
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the SSU.
- Select an item name, and then select option.
| M-MDS display | Function | Initial setting | Setting contents | Control unit | ||
|---|---|---|---|---|---|---|
| Advanced keyless function. (1) | The advanced keyless entry system and push button start system functions can be disabled. | Enabled. | Enabled./Disabled. | Start stop unit | ||
| Walk Away Lock. | The out-of-area (reception area) type auto lock function can be set. | OFF | OFF/ON | Start stop unit | ||
| Auto Relock Time. | The operation start time of the auto re-lock function can be changed. | 60 seconds | 30 seconds/60 seconds/90 seconds | Start stop unit | ||
| Keyless Lock Beep Volume. | The keyless beeper volume can be adjusted. | Medium | Off/Low/Medium/High | Start stop unit | ||
|
||||||
Setting method by operation of remote transmitter button
- The following setting can be changed by operation of the remote transmitter button.
M-MDS display Function Initial setting Setting content Control unit Keyless Lock Beep Volume. The keyless beeper volume can be adjusted. Medium Off/Low/Medium/High Start stop unit - Change the setting for the keyless beeper volume referring to the following procedure:
NOTE:
- If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
- The ignition is switched to ACC or ON (engine off or on).
- The driver's door is closed.
- The liftgate is open.
- The remote transmitter operation is not performed for approx. 10 s.
- The UNLOCK button on the remote transmitter is pressed.
- A request switch is pressed.
Using center display