Retractable Fastback Control Module Inspection: Notes

Remove the following parts:
1. Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION ).
2. Shift lever knob (MT)
3. Shift panel assembly (See SHIFT PANEL REMOVAL/INSTALLATION ).
4. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION ).
5. Parking brake lever boot panel(See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION ).
6. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION ).
7. Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION ).
8. Wind blocker (See WIND BLOCKER REMOVAL/INSTALLATION ).
9. Front seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION ).
10. Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION ).
11. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION ).
12. Back trim (See BACK TRIM REMOVAL/INSTALLATION ).
Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).

If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.

If the system does not work normally even though the inspection items are normal, replace the retractable fastback control module.