Diagnostic Procedure

DTC U0422:82 (360° VIEW MONITOR CONTROLE MODULE) DIAGNOSTIC PROCEDURE

Step	Inspection		Action
1	VERIFY OTHER 360°VIEW MONITOR CONTROL MODULE DTCs Clear the DTC for the 360°view monitor control module using the M-MDS. (See CLEARING DTC (360°VIEW MONITOR CONTROL MODULE) .) Retrieve the 360°view monitor control module DTCs using the M-MDS. (See DTC INSPECTION (360°VIEW MONITOR CONTROL MODULE) .) Is DTC U3000:41 or U3000:49 displayed?	Yes	Replace the 360°view monitor control module, then go to Step 4. (See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	VERIFY FRONT BODY CONTROL MODULE (FBCM) DTCs Retrieve the front body control module (FBCM) DTCs using the M-MDS. (See DTC INSPECTION [FRONT BODY CONTROL MODULE (FBCM)] .) Are any DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [FRONT BODY CONTROL MODULE (FBCM)] .)
2		No	Go to the next step.
3	VERIFY IF MALFUNCTIONING LOCATION IS FRONT BODY CONTROL MODULE (FBCM) DEPENDING ON REPEATABILITY Clear the DTC for the 360°view monitor control module using the M-MDS. (See CLEARING DTC (360°VIEW MONITOR CONTROL MODULE) .) Retrieve the 360°view monitor control module DTCs using the M-MDS. (See DTC INSPECTION (360°VIEW MONITOR CONTROL MODULE) .) Is the same Pending DTC present?	Yes	Replace the front body control module (FBCM), then go to the next step. (See FRONT BODY CONTROL MODULE (FBCM) REMOVAL/INSTALLATION .)
3		No	Go to Step 5.
4	VERIFY THAT REPAIRS HAVE BEEN COMPLETED Clear the DTC for the 360°view monitor control module using the M-MDS. (See CLEARING DTC (360°VIEW MONITOR CONTROL MODULE) .) Retrieve the 360°view monitor control module DTCs using the M-MDS. (See DTC INSPECTION (360°VIEW MONITOR CONTROL MODULE) .) Is the same Pending DTC present?	Yes	Repeat the inspection from Step 1. If the malfunction recurs, replace the 360°view monitor control module. (See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION.) Go to the next step.
4		No	Go to the next step.
5	VERIFY IF OTHER DTCs DISPLAYED Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE (360°VIEW MONITOR CONTROL MODULE) .)
5		No	DTC troubleshooting completed.