No. 3 Start Stop Unit Replacement And Programming Procedure Due To Simultaneous Replacement Of Start Stop Unit/PCM: Notes
CAUTION:
- The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
- Because it is necessary to program two or more remote transmitters to the immobilizer system-related parts to start the engine, perform the remote transmitter programming after clearing the remote transmitter.
NOTE:
- Before beginning the procedure, verify that the customer has provided all of the remote transmitters for the vehicle.
- The engine cannot be started unless two or more remote transmitters are programmed after the replacement.