LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle - Overhaul [C66M-R]) >> Secondary Shaft Component Assembly >> Synchronizer Key Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Synchronizer Key Assembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Align with the direction of the synchronizer key as shown in the figure, and assemble the clutch hub.
    Fig 1: Identifying Synchronizer Key Aligning Position
    G08347889
  2. After the synchronizer key is assembled, verify that the detent ball of the synchronizer key is engaged with the positioning groove of the clutch hub sleeve.
    Fig 2: Identifying Positioning Groove Of Clutch Hub Sleeve
    G08347890
scientia non olet · About LEMON Manuals