LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Dynamic Stability Control System (Service Information)) >> DSC HU/Control Module Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DSC HU/Control Module Inspection: Notes

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the DSC HU/Control Module connector. (See DSC HU/Control Module REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] .)
  2. Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Attach the tester lead to the DSC HU/Control Module wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.
scientia non olet · About LEMON Manuals