LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Entertainment System) >> Maintenance Monitor Operation Procedure >> Oil Change Setting Procedure >> Using M-MDS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using M-MDS

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not select "ON" under the following driving conditions.
    • The vehicle is used as a police car, taxi, or for driving instruction.
    • The vehicle is driven under dusty conditions.
    • The vehicle is idled or driven at low speeds for extended periods.
  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification is completed, select the following from the M-MDS initial screen.
    1. "Powertrain"
    2. "Engine Oil Maintenance Monitor"
    3. "Change setting"
  3. Select "ON*1" or "OFF" from the M-MDS screen.

*1: When oil inspection/replacement is set to "ON", the engine oil deterioration condition is calculated based on the frequency of engine starts and the distance travelled.

scientia non olet · About LEMON Manuals