Setting method by operation of remote transmitter button

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

The following setting can be changed by operation of the remote transmitter button.

Function	Initial setting	Setting content	Control unit
Keyless Lock Beep Volume.	Medium	High/Medium/Low/Off	Start stop unit

Change the setting for the keyless beeper volume referring to the following procedure:

NOTE:

If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
- The ignition is switched to ACC or ON (engine off or on).
- The driver's door is closed.
- The liftgate is open.
- The remote transmitter operation is not performed for approx. 10 s.
- The UNLOCK button on the remote transmitter is pressed.
- A request switch is pressed.

Fig 1: Advanced Keyless Entry System Flowchart

Courtesy of MAZDA MOTORS CORP.

*1: If the keyless beeper volume is off, the beeper does not sound.