Protector Installation Note

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

Install the protector.

Fig 1: Protector Bolts
Courtesy of MAZDA MOTORS CORP.

Tightening torque

A: 8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}

B: 20-26 N.m {2.1-2.6 kgf.m, 15-19 ft.lbf}
Install the ground cable to the protector.

Fig 2: Ground Cable And Protector
Courtesy of MAZDA MOTORS CORP.

Tightening torque

8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}
Install the clip to the protector.

Fig 3: Protector Clip

Courtesy of MAZDA MOTORS CORP.