LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> MX-5 Miata RF Club, Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> On-Board Diagnostic - SAS Control Module - Standard Deployment Control System >> PID/Data Monitor Table (SAS Control Module (Standard Deployment Control System))
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PID/Data Monitor Table (SAS Control Module (Standard Deployment Control System))

PID Unit/Condition Data contents SAS control module terminal
AB_WL (Air bag system warning light status) Lamp_Off/Lamp_On/Plant_Mode/Unknown
  • Air bag system warning light off: Lamp_Off
  • Air bag system warning light on: Lamp_On
  • Air bag system warning light status: Plant_Mode
  • Air bag system warning light status: Unknown
3Q, 3S
P_SEAT_M_S (Occupancy sensor) Off/On
  • Not occupant seated in passenger-side seat: Off
  • Occupant seated in passenger-side seat: On
2AA
PCD_A (Poorly connected detector bar terminal voltage nominal (SAS control module connector A)) V
  • Normal connected: 0.27 V or less
  • Poor connected: 3.17 V or more
1a, 1b
PCD_B (Poorly connected detector bar terminal voltage nominal (SAS control module connector B)) V
  • Normal connected: 0.27 V or less
  • Poor connected: 3.17 V or more
2a, 2b
PCD_C (Poorly connected detector bar terminal voltage nominal (SAS control module connector C)) V
  • Normal connected: 0.27 V or less
  • Poor connected: 3.17 V or more
3a, 3b
RES_F_AB1_D (Driver-side air bag module (inflatorNo. 1) resistance nominal) ohm Continuous: 1.37-6.33 ohms 3C, 3G
RES_F_AB1_P (Passenger-side air bag module (inflatorNo. 1) resistance nominal) ohm Continuous: 0.88-6.33 ohms 3K, 3N
RES_S_AB_D (Driver-side side air bag module resistance nominal) ohm Continuous: 0.88-10.53 ohms 1C, 1G
RES_S_AB_P (Passenger-side side air bag module resistance nominal) ohm Continuous: 0.88-10.53 ohms 1K, 1N
RES_SB_P_D (Driver-side pre-tensioner seatbelt resistance nominal) ohm Continuous: 0.88-6.33 ohms 2C, 2G
RES_SB_P_P (Passenger-side pre-tensioner seatbelt resistance nominal) ohm Continuous: 0.88-6.33 ohms 2K, 2N
SEAT_B_D (Driver-side buckle switch status) Unbuckled/Buckled
  • Driver-side seat belt fastened (Driver-side buckle switch off): Buckled
  • Driver-side seat belt not fastened (Driver-side buckle switch on): Unbuckled
2U
SEAT_B_P (Passenger-side buckle switch status) Unbuckled/Buckled
  • Passenger-side seatbelt fastened (Passenger-side buckle switch off): Buckled
  • Passenger-side seatbelt not fastened (Passenger-side buckle switch on): Unbuckled
2W
VPWR_IGA (SAS control module power voltage) V Ignition is switched ON: IG1 voltage 2AD