LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> MX-5 Miata Sport, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Regulator Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Regulator Removal/Installation

  1. Perform the door glass preparation. (See DOOR GLASS REMOVAL/INSTALLATION ).
  2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION ).
  3. Remove the following parts:
    1. Door trim (See DOOR TRIM REMOVAL/INSTALLATION ).
    2. Door module panel (See DOOR MODULE PANEL REMOVAL/INSTALLATION ).
    3. Door glass (See DOOR GLASS REMOVAL/INSTALLATION ).
  4. Disconnect the connector.
    Fig 1: Identifying Power Window Regulator Connector
    G11275142Courtesy of MAZDA MOTORS CORP.
  5. Remove the nuts (1).
    Fig 2: Identifying Power Window Regulator, Door Module Panel Installation Hole And Nuts With Torque Specifications
    G11275143Courtesy of MAZDA MOTORS CORP.
  6. Remove the nuts (2).
  7. Remove the power window regulator through the door module panel installation hole.
  8. Install in the reverse order of removal.
  9. Perform the power window system initial setting. (See POWER WINDOW SYSTEM INITIALIZATION PROCEDURE ).
scientia non olet · About LEMON Manuals