Turn Light System (Using M-MDS)
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the R_BCM.
- Select an item name, and then select option.
| M-MDS Display | Function | Initial Setting | Setting Contents | Control Unit |
|---|---|---|---|---|
| Three-Flash Turn Signal | The turn light system can be switched between operable and inoperable. | ON | OFF/ON | Rear body control module (RBCM) |