DTC B00A0-54: Occupant Classification Sensor Calibration Setting Not Set: Notes

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DTC B00A0:54 SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Occupant classification sensor calibration setting not set
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. Occupant classification sensor calibration setting has not been done correctly
Fail-safe	Not applicable
Possible cause	Occupant classification sensor calibration setting not implemented Occupant classification sensor calibration setting invalid Occupant classification sensor malfunction
System wiring diagram	Not applicable