LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Control System (VIN Y)) >> Pcm Removal/Installation >> PCM Bracket Temporary Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PCM Bracket Temporary Installation Note

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the PCM bracket as shown below in the figure.
    CAUTION:
    • Do not apply force to the PCM from above until the installation is completed after temporarily supporting the PCM bracket. Otherwise, the tab for temporary support shown below in the figure could deform.
    Fig 1: PCM Bracket
    G11436164Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals