DTC B115E-54: Aiming Not Performed: Notes

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DTC B115E:54 (360°VIEW MONITOR CONTROLE MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

Description	Aiming Not Performed
Detection condition	The 360°view monitor control module detects camera aiming has not been performed.
Fail-safe	Projected vehicle path lines and fixed lines for each view are not displayed Icons for cameras not aimed are indicated in area where vehicle image is displayed
Possible cause	360°view monitor control module malfunction Aiming is not performed (VIN mismatch)
System wiring diagram	Not applicable