Fuel Injection Control (+) Signal
WARNING: This page is about a different variant/trim than selected.
PCM terminals
- Fuel Injection No. 1: 1DG (+)-body ground (-)
- Fuel Injection No. 2: 1CY (+)-body ground (-)
- Fuel Injection No. 3: 1CU (+)-body ground (-)
- Fuel Injection No. 4: 1 DC (+)-body ground (-)
Oscilloscope setting
- 10 V/DIV (Y), 5 ms/DIV (X), DC range
Vehicle condition
- Idle after warm up