Sensor Cover Removal/Installation

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Pull sensor cover A in the direction of the arrow shown in the figure below, detach tabs A, B and C, and remove sensor cover A from the base.

Fig 1: Pulling Sensor Cover A
Courtesy of MAZDA MOTORS CORP.
Pull sensor cover B in the direction of the arrow shown in the figure below, detach the pins and remove sensor cover B from the base.

Fig 2: Pulling Sensor Cover B
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.