Diagnostic Procedure

DTC U3000:49 (POWER LIFTGATE CONTROL MODULE) DIAGNOSTIC PROCEDURE

STEP	INSPECTION		ACTION
1	VERIFY IF MALFUNCTIONING LOCATION IS POWER LIFTGATE (PLUG) CONTROL MODULE DEPENDING ON REPEATABILITY Clear the DTC for the power liftgate (PLUG) control module using the M-MDS. (See CLEARING DTC [POWER LIFTGATE (PLUG) CONTROL MODULE] .) Retrieve the power liftgate (PLUG) control module DTCs using the M-MDS. (See DTC INSPECTION [POWER LIFTGATE (PLUG) CONTROL MODULE] .) Is the same DTC displayed?	Yes	Replace the power liftgate (PLUG) control module, then go to the next step. (See POWER LIFTGATE (PLUG) CONTROL MODULE REMOVAL/INSTALLATION .)
1		No	Go to the next step.
2	VERIFY IF OTHER DTCs DISPLAYED Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [POWER LIFTGATE (PLUG) CONTROL MODULE] .)
2		No	DTC troubleshooting completed.