Function Inspection Using M-MDS

DIAGNOSTIC PROCEDURE - FUNCTION INSPECTION USING M-MDS

STEP	INSPECTION	RESULTS	ACTION
1	PURPOSE: VERIFY RELATED REPAIR INFORMATION AVAILABILITY Verify related Service Bulletins and/or on-line repair information availability. Is any related repair information available?	Yes	Perform repair or diagnosis according to the available repair information. If the vehicle is not repaired, go to the next step.
1		No	Go to the next step.
2	PURPOSE: RECORD FREEZE FRAME DATA/SNAPSHOT DATA AND DIAGNOSTIC MONITORING TEST RESULTS TO UTILIZE WITH REPEATABILITY VERIFICATION NOTE: Recording can be facilitated using the screen capture function of the PC. Record the FREEZE FRAME DATA/snapshot data and DIAGNOSTIC MONITORING TEST RESULTS (A/F sensor, HO2S related) on the repair order.	-	Go to the next step.
3	PURPOSE: VERIFY CONNECTOR CONNECTIONS Start the engine. Access the following PIDs using the M-MDS: (See ON-BOARD DIAGNOSTIC TEST .) HTR12 O2S12 When the following parts are shaken, does the PID value include a PID item which has changed? HO2S PCM	Yes	Repair or replace the applicable connector parts. Go to the troubleshooting procedure to perform the procedure from Step 10.
3		No	Go to the next step.
4	PURPOSE: VERIFICATION IF MALFUNCTION CAUSED BY HO2S Start the engine and idle it. Access the O2S12 PID using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST .) Is the O2S12 PID value normal? (See PCM INSPECTION [SKYACTIV-G 2.5T] .)	Yes	Go to the next step.
4		No	Go to the troubleshooting procedure to perform the procedure from Step 1.
5	PURPOSE: VERIFICATION IF MALFUNCTION CAUSED BY HO2S HEATER Start the engine and idle it. Access the HTR12 PID using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST .) Is the HTR12 PID value normal? (See PCM INSPECTION [SKYACTIV-G 2.5T] .)	Yes	Go to the troubleshooting procedure to perform the procedure from Step 1.
5		No	Go to the troubleshooting procedure to perform the procedure from Step 9.