LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> 6 Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostics - Dynamic Stability Control >> DTC Inspection (Dynamic Stability Control (DSC)) >> Snapshot Data Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Snapshot Data Table

NOTE:
  • The DSC HU/CM stores the following two types of information when a DTC is detected and displays snap shot data in the M-MDS.
    • Vehicle information detected by DSC HU/CM
    • Vehicle information detected by instrument cluster and received by DSC HU/CM via CAN signal
  • Refer to PID monitor table for confirm the DSC operation status while the DSC HU/CM does not store the DTC. (See PID/DATA MONITOR TABLE (DYNAMIC STABILITY CONTROL (DSC)) .)
  • Snapshot data items are not displayed, according to detected DTC.

-: Not applicable

Snapshot Data Item Unit Data Contents Data Read/Use Method Corresponding Data Monitor Items
ABS Inactive/Active Antilock braking system - -
BRK_F_P_R Pa, psi Brake fluid line hydraulic pressure (Raw Value) - BRK_F_P_R
BTCS Inactive/Active Brake traction control system - -
EDC#1 Inactive/Active Engine drag control - -
LAT_ACCL_R G Lateral acceleration (Raw Value) - LAT_ACCL_R
LON_ACCL_R G Longitudinal acceleration (Raw Value) - LON_ACCL_R
STR_ANG_C o Steering wheel angle (Calculated Value) - STR_ANG_C
TCS Inactive/Active Traction control system - -
VPWR V Power supply - VPWR
VSPD KPH, MPH Vehicle speed - VSPD
YAW_RATE_R °/s Yaw Rate (Raw Value) - YAW_RATE_R