LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> CX-3 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> On-Board Diagnostic - Blind Spot Monitoring Control Module >> PID/Data Monitor Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PID/Data Monitor Table

-: Not applicable

PID/DATA MONITOR (BLIND SPOT MONITORING SYSTEM)

PID name Unit/Status Data contents Module control terminal
Buzzer Off/On
  • Off: Blind spot monitoring (BSM) warning buzzer does not sound.
  • On: Blind spot monitoring (BSM) warning buzzer sounds.
D, E (CAN)
INTNL_TMP_L °C, °F Displays Blind spot monitoring (BSM) control module (LH) internal temperature. -
INTNL_TMP_R °C, °F Displays Blind spot monitoring (BSM) control module (RH) internal temperature. G, J (CAN)
MAIN_SW Off/On With blind spot monitoring (BSM) switch
  • Off: Blind spot monitoring (BSM) switch not pressed
  • On: Blind spot monitoring (BSM) switch pressed With blind spot monitoring (BSM) OFF switch
  • Off: Blind spot monitoring (BSM) OFF switch not pressed
  • On: Blind spot monitoring (BSM) OFF switch pressed
D, E (CAN)
OP_BRT_L - Displays the Blind spot monitoring (BSM) warning light (LH) output brightness. -
OP_BRT_R - Displays the Blind spot monitoring (BSM) warning light (RH) output brightness. G, J (CAN)
SYSTEM_ST Off/Passive_On/Active_On/Failure
  • Off: Blind spot monitoring (BSM) system does not operate.
  • Passive_On: Blind spot monitoring (BSM) system is on standby.
  • Active_On: Blind spot monitoring (BSM) system operates.
  • Failure: Blind spot monitoring (BSM) system malfunction.
-
TURN_SW_L Off/On
  • Off: Turn switch is in position other than LH.
  • On: Turn switch is in LH position.
D, E (CAN)
TURN_SW_R Off/On
  • Off: Turn switch is in position other than RH.
  • On: Turn switch is in RH position.
D, E (CAN)
VPWR_L V Displays Blind spot monitoring (BSM) control module (LH) power supply voltage. I
VPWR_R V Displays Blind spot monitoring (BSM) control module (RH) power supply voltage. G, J (CAN)
VSPD KPH, MPH Displays the vehicle speed. D, E (CAN)
WRN_IND_L Off/On
  • Off: Blind spot monitoring (BSM) warning indicator light (LH) turns off.
  • On: Blind spot monitoring (BSM) warning indicator light (LH) turns on.
G, J (CAN)
WRN_IND_R Off/On
  • Off: Blind spot monitoring (BSM) warning indicator light (RH) turns off.
  • On: Blind spot monitoring (BSM) warning indicator light (RH) turns on.
G, J (CAN)
YAW_RATE °/s
  • -: Vehicle is stopped or while moving straight ahead.
  • Exceeds 0°/s: Vehicle tilted left.
  • Less than 0°/s: Vehicle tilted right.
D, E (CAN)