Rear Body Control Module (RBCM) Removal/Installation: Notes
CAUTION:
- If configuration is not performed when the rear body control module (RBCM) is replaced with a new one, the vehicle specification information is not stored in the rear body control module (RBCM) and the system will not operate normally.
- When performing configuration, it is necessary to read the vehicle specification information from the rear body control module (RBCM) before replacing it. Connect the M-MDS to the vehicle and perform vehicle identification before removing the rear body control module (RBCM). The vehicle specification information is temporarily stored in the M-MDS.
NOTE:
- The rear body control module (RBCM) prior to replacement stores the vehicle specification information.
- A new rear body control module (RBCM) does not store any vehicle specification information.
- If the vehicle specification information from the rear body control module (RBCM) prior to replacement cannot be read, perform the configuration using As-Built data.