Diagnostic Procedure

DTC U3000:49 (AUTO LEVELING CONTROL MODULE) DIAGNOSTIC PROCEDURE

Step	Inspection		Action
1	VERIFY IF MALFUNCTIONING LOCATION IS AUTO LEVELING CONTROL MODULE DEPENDING ON REPEATABILITY Clear the auto leveling control module DTCs using the M-MDS. (See CLEARING DTC .) Retrieve the auto leveling control module DTCs using the M-MDS. (See DTC INSPECTION .) Is the same DTC displayed?	Yes	Replace the auto leveling control module, then go to the next step. (See AUTO LEVELING CONTROL MODULE REMOVAL/INSTALLATION .)
1		No	Go to the next step.
2	VERIFY IF OTHER DTCs DISPLAYED Are any other DTCs displayed?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE .)
2		No	DTC troubleshooting completed.