DTC U2300-55: Instrument Cluster Configuration Not Performed [Retractable Hardtop Control Module]: Notes

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

DTC U2300:55 (RETRACTABLE HARDTOP CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

Description	Instrument cluster configuration not performed
Detection condition	The retractable hardtop control module receives a signal which indicates the instrument cluster configuration is not performed with the ignition switched ON (engine off or on).
Fail-safe	Stops retractable hardtop operation
Possible cause	NOTE: To correctly write the configuration data, sent from the instrument cluster to the retractable hardtop control module, to the retractable hardtop control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on). Instrument cluster configuration is not completed. Instrument cluster malfunction Retractable hardtop control module malfunction
System wiring diagram	Not applicable