With Auto-Open/Close Function For All Windows

NOTE:

Perform the following inspection for the power window main switch and the power window subswitches for each window.

AUTOMATIC OPEN/CLOSE FUNCTION INSPECTION (WITH AUTO - OPEN/CLOSE FUNCTION FOR ALL WINDOWS)

Step	Inspection		Action
	Switch the ignition ON (engine off or on). Operate the each power window switch in auto open/close function. Does the each door glass move up and down in auto open/close function?	Yes	Go to the next step.
		No	Door glass does not move up and down in auto open/close function: Go to Step 1 of "Door glass does not move up and down in automatic mode" troubleshooting procedure. (See DOOR GLASS DOES NOT MOVE UP AND DOWN IN AUTOMATIC MODE [POWER WINDOW SYSTEM] .) Door glass moves up and down in auto open/close function, but door glass reverses: Go to Step 1 of "Door glass reverses even though the glass does not encounter a foreign object while it is moving up in automatic mode" troubleshooting procedure. (See DOOR GLASS REVERSES EVEN THOUGH THE GLASS DOES NOT ENCOUNTER A FOREIGN OBJECT WHILE IT IS MOVING UP IN AUTOMATIC MODE [POWER WINDOW SYSTEM] .)
2	Gently pull the each power window switch while the door glass is moving down in auto open/close function. Does the glass stop?	Yes	Go to the next step.
2		No	Replace the suspected power window switch, then go to the automatic door glass return function inspection.
3	Gently press the each power window switch while the door glass is moving upin auto open/close function. Does the glass stop?	Yes	Auto open/close function is normal. Perform IG OFF timer function inspection.
3		No	Replace the suspected power window switch, then go to the automatic door glass return function inspection.