DTC C0062-76: SAS Control Module (Poor Installation) [DSC HU/Cm]: Outline

DTC C0062:76 (DSC HU/CM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	SAS control module (poor installation)
Detection condition	NOTE: The low-G sensor is built into the SAS control module. While driving, the DSC HU/CM detects that the longitudinal-G value does not change as a result of comparing it to the longitudinal-G calculated from the wheel speed.
Fail-safe	Refer to "DTC Table" and "Fail-safe Function Malfunction Contents Table". (See DTC TABLE [DSC HU/CM (US)] .)
Possible cause	SAS control module incorrect installation SAS control module malfunction Low-G sensor malfunction DSC HU/CM malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable