LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel System (VIN Y)) >> High Pressure Fuel Pump Removal/Installation >> Protector Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Protector Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the protector.
  2. Install the ground cable to the protector.
    Fig 1: Ground Cable Bolt With Torque Specification
    G13713790Courtesy of MAZDA MOTORS CORP.
  3. Install the clip to the protector.
G13713785Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals