With 360° View Monitor Control Module: Outline
DTC B14F7:76 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE - WITH 360° VIEW MONITOR CONTROL MODULE
| System malfunction location |
Improper positioning of camera/aiming error |
| Detection condition |
- The vehicle control module (VCM) detects any of the following conditions.
- 360° view monitor control module detects an aiming error condition for 10 s.
- 360° view monitor control module detects that the front camera or rear mount camera is positioned improperly for 5 min while driving.
|
| Fail-safe |
(See DTC TABLE [VEHICLE CONTROL MODULE (US)]
.) |
| Possible cause |
- Front camera poor installation
- Rear mount camera poor installation
- Aiming error
- 360° view monitor control module malfunction
- Vehicle control module (VCM) malfunction (built into body control module (BCM))
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |