No. 6 DSC*2 Operates Frequently/DSC Does Not Work Correctly *2: TCS/DSC Indicator Light Goes On And Off While DSC Operates: Notes
NO. 6 DSC*2 OPERATES FREQUENTLY/DSC DOES NOT WORK CORRECTLY*2 (DYNAMIC STABILITY CONTROL) POSSIBLE CAUSE
| Troubleshooting item |
DSC operates frequently
DSC does not work correctly |
| Possible cause |
- DSC HU/Control Module detected malfunction. (Input and output device malfunction)
- There is a difference in size or air pressure between front or rear tires.
- Poor installation with SAS control module (yaw rate sensor, low-G sensor) (If SAS control module is poorly installed, DSC may operate intermittently.)
- When replacing DSC HU/Control Module initialization is not performed. (If initialization is not performed correctly, DSC may not work correctly.)
- Incorrect ABS wheel speed sensor is inputted to DSC HU/Control Module.
|