Diagnostic Procedure

DTC U3000:42 [AUTO LEVELING CONTROL MODULE] DIAGNOSTIC PROCEDURE

STEP	INSPECTION		ACTION
1	VERIFY IF MALFUNCTIONING LOCATION IS AUTO LEVELING CONTROL MODULE DEPENDING ON REPEATABILITY Clear the DTC for the auto leveling control module using the M-MDS. (See CLEARING DTC [AUTO LEVELING CONTROL MODULE] .) Retrieve the auto leveling control module DTCs using the M-MDS. (See DTC INSPECTION [AUTO LEVELING CONTROL MODULE] .) Is the same Pending DTC present?	Yes	Replace the auto leveling control module, then go to the next step. (See AUTO LEVELING CONTROL MODULE REMOVAL/INSTALLATION .)
1		No	Go to the next step.
2	VERIFY IF OTHER DTCs DISPLAYED Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [AUTO LEVELING CONTROL MODULE] .)
2		No	DTC troubleshooting completed.