LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Dynamic Stability Control System (Service Information)) >> DSC HU/Cm Removal/Installation >> Brake Pipe Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pipe Installation Note

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the marks made before removal and install the brake pipe to the DSC HU/CM and brake pipe joint referring to the figure below.
    Fig 1: Brake Pipe To DSC HU/CM And Brake Pipe Joint
    G12234491Courtesy of MAZDA MOTORS CORP.
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
scientia non olet · About LEMON Manuals