LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Dynamic Stability Control System (Service Information)) >> DSC Related Parts Sensor Initialization Procedure >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DSC Related Parts Sensor Initialization Procedure: Notes

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • If the initialization procedure is not completed, the DSC will not operate properly and it might cause an unexpected accident. Therefore, after replacing the DSC HU/CM or SAS control module, always perform the initialization procedure to insure proper DSC operation.
scientia non olet · About LEMON Manuals