Function Inspection

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to the DLC-2.
Switch the ignition ON (engine off).
Display the PID OIL_TEMP. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
Compare the voltage and temperature indications for the PID OIL_TEMP with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See Resistance Inspection .)

Standard

PID OIL TEMPERATURE SPECIFICATION

OIL_TEMP
V	°C {°F}
Approx. 3.02	Approx. 32 {89.6}
Approx. 1.1	Approx. 94 {201.2}