Diagnostic Procedure
WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DTC C0061:54 ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | PERFORM ACCELERATION SENSOR INITIAL POSITION LEARNING
|
Yes | Perform the headlight auto leveling system initial setting again using the MMDS, then go to the next step. (See HEADLIGHT AUTO LEVELING SYSTEM INITIALIZATION .) |
| No | Go to Step 3. | ||
| 2 | VERIFY THAT REPAIRS HAVE BEEN COMPLETED
|
Yes | Replace the adaptive front lighting system (AFS) control module, then go to the next step. (See ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 3 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE (ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE) .) |
| No | DTC troubleshooting completed. | ||