LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Lighting System) >> Pocket Light Removal/Installation >> Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pocket Light Removal/Installation: Front

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch the ignition off.
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the harness.
    Fig 1: Pocket Light, Connector, Front Door Trim And Screw
    G12234983Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the connector.
  6. Remove the screw.
  7. Remove the pocket light.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals