DTC U3000-56: Front Body Control Module (FBCM) Configuration Error: Notes

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DTC U3000:56 (FRONT BODY CONTROL MODULE (FBCM)) DETECTION CONDITION AND POSSIBLE CAUSE

Description	Front Body Control Module (FBCM) Configuration Error
Detection condition	Front body control module (FBCM) configuration error detected.
Fail-safe	When the ignition is switched ON (engine off or on), the headlight LO and the TNS (parking lights) are illuminated. When the ignition is switched off, the headlight LO and the TNS (parking lights) are turned off. Inhibits the windshield wiper control except the continuous low operation.
Possible cause	Front body control module (FBCM) configuration error Front body control module (FBCM) malfunction
System wiring diagram	Not applicable