DTC C0051-67: EPS Control Module: Notes

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DTC C0051:67 (DYNAMIC STABILITY CONTROL (DSC)) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C0051:67	EPS Control Module
DETECTION CONDITION		DSC HU/CM receives steering angle neutral position reset signal after neutral position was set.
FAIL-SAFE FUNCTION		Refer to "Fail-safe Function Malfunction Contents". (See DTC TABLE (DYNAMIC STABILITY CONTROL (DSC)) .)
POSSIBLE CAUSE		EPS control module malfunction Signal errors from EPS control module due to rough road driving DSC HU/CM malfunction Poor connection at connectors (female terminal)
SYSTEM WIRING DIAGRAM		Not applicable