Washer Fluid-Level Sensor Inspection
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
- Remove the front bumper. (See FRONT BUMPER REMOVAL .) (See FRONT BUMPER INSTALLATION .)
- Disconnect the connectors. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)
- Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.
- If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)