Instrument Cluster Removal/Installation: Notes
CAUTION:
- If configuration is not performed when the instrument cluster is replaced with a new one, the vehicle specification information is not stored in the instrument cluster and the system will not operate normally.
- When performing configuration, it is necessary to read the vehicle specification information from the instrument cluster before replacing it. Connect the M-MDS to the vehicle and perform vehicle identification before removing the instrument cluster. The vehicle specification information is temporarily stored in the M-MDS.
NOTE:
- The instrument cluster prior to replacement stores the vehicle specification information.
- A new instrument cluster does not store any vehicle specification information.
- If the vehicle specification information from the instrument cluster prior to replacement cannot be read, perform the configuration using As-Built data.