Related PIDs

PID REFERENCE

Item (definition)	Unit/Condition	Definition	Condition/Specification (Reference)
ECT	°C, °F	Engine coolant temperature input from ECT sensor No. 1	Displays ECT
ECT	V	ECT sensor No. 1 voltage	Ignition switched ON (engine off) ECT is 29°C {84°F}: Approx. 2.65 V Idle (after warm up) ECT is 88°C {190°F}: Approx. 0.71 V
MAF	g/Sec	Mass air flow input from MAF sensor	Displays MAF
MAF	V	MAF sensor voltage	Without coolant control valve Ignition switched ON (engine off) (MAF: 0.59 g/s {0.078 lb/min}): Approx. 0.72 V Idle (after warm up) (MAF: 2.17 g/s {0.287 lb/min}): Approx. 0.97 V Racing (engine speed is 2, 000 RPM) (MAF: 4.73 g/s {0.626 lb/min}): Approx. 1.26 V With coolant control valve Ignition switched ON (engine off) (MAF: 0.00 g/s {0 lb/min}): Approx. 1.69 V (ECT is 53°C {127°F}) Idle (after warm up) (MAF: 2.50 g/s {0.331 lb/min}): Approx. 1.89 V (ECT is 93°C {199°F}) Racing (engine speed is 2, 000 RPM) (MAF: 3.80 g/s {0.503 lb/min}): Approx. 2.02 V (ECT is 95°C {203°F})
MAP	KPa {MPA}, mBar {BAR}, psi, in H20	Manifold absolute pressure input from MAP sensor	Displays MAP
MAP_V	V	MAP sensor voltage	Ignition switched ON (engine off) (MAP:101 kPa {1.03 kgf/cm ² , 14.6 psi}): Approx. 4.12 V Idle (after warm up) (MAP: 33 kPa {0.34 kgf/cm ² , 4.8 psi}): Approx. 1.9 V Racing (engine speed is 2, 000 RPM) (MAP: 26 kPa {0.27 kgf/cm ² , 3.8 psi}): Approx. 1.23 V
RPM	RPM	Engine speed	Displays engine speed
TP_REL	%	Throttle valve opening angle (relative value) with value at throttle valve fully close timing as the start point	Accelerator pedal released: Approx. 12% Accelerator pedal fully depressed: Approx. 82%