DTC B0072-55; B1228-55: Configuration Setting Error: Notes
WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
| System malfunction location |
- B0072:55:Configuration setting error (passenger-side lap pre-tensioner seat belt structural malfunction)
- B1228:55:Configuration setting error (driver-side lap pre-tensioner seat belt structural malfunction)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
- Parts which have not been set to SAS control module are assembled
|
| Fail-safe |
Not applicable |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Driver or passenger-side lap pre-tensioner seat belt assembly incorrect
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |