DTC U2100-00: Configuration Not Set: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

System malfunction location	U2100:00: Configuration not set
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. SAS control module configuration setting has not been set
Fail-safe function	Not applicable
Possible cause	SAS control module configuration setting not implemented SAS control module malfunction
System wiring diagram	Not applicable