LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Basic System >> Resistor Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistor Inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    2. Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .)
  3. Verify that the resistance between the resistor terminals is as shown in the table.
    G11431340Courtesy of MAZDA MOTORS CORP.
    • If there is any malfunction, replace the resistor.
    TERMINAL RESISTANCE SPECIFICATION

    Terminal Resistance (ohm)
    A-D 0.54
    A-B 1.47
    A-C 3.92
scientia non olet · About LEMON Manuals