Front Stabilizer Control Link Inspection: Notes
- Remove the front stabilizer control link. (See FRONT STABILIZER REMOVAL .) (See FRONT STABILIZER INSTALLATION .)
- Inspect the front stabilizer control link for bends or damage.
- If there is any malfunction, replace the front stabilizer control link. (See FRONT STABILIZER REMOVAL .) (See FRONT STABILIZER INSTALLATION .)
- Rotate and shake the front stabilizer control link ball joint 10 times.
- Install a hexagonal wrench to the front stabilizer control link ball joint stud, and measure the rotational torque of the front stabilizer control link ball joint using a torque wrench.