DTC B10A0-64: Wiper And Washer Switch Error Signal Received: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

Description	Wiper and washer switch error signal received
Detection condition	BCM receives error signals from the start stop unit for 5 s or more with the ignition switched ON (engine off or on).
Fail-safe	Windshield wiper system Continue the controls prior to the windshield wiper malfunction detection. Front washer system Stop the front washer control.
Possible cause	Start stop unit malfunction Wiper and washer switch malfunction BCM malfunction
System wiring diagram	Not applicable